Synergic welding device MIG / MAG, P1 GYS Auto with accessories

Synergic welding device MIG / MAG, P1 GYS Auto with accessories

This P1 GYS AUTO is a synergic, single-phase MIG-MAG welding machine, which is specially designed for car body repair work. The device can weld all kinds of aluminum workpieces without spatter. It is equipped with a very intuitive color control screen. And the capabilities of the device allow you to weld various steel, aluminum and CuSi3 / CuAl8 materials. Whether it's 1.0mm or 1.2mm thick material, using pulse welding mode will not cause any problems or difficulties.

MIG / MAG smooth + impulse welding:

• Steel and stainless steel wire: Ø 0.6 – 1.2 mm
• Aluminum wire: Ø 0.8 – 1.2 mm
• CuSi and CuAl wire: Ø 0.8 – 1.0 mm

Intelligence:

• Specific synergic welding: steel; AlMg; AlSi; CrNi; CuSi. After entering three welding parameters: wire diameter; material and welding gas and the thickness of the material that we want to weld. Then, the device automatically selects the remaining necessary parameters.
• PFC technology: power factor correction, it corrects all voltage fluctuations in the 185-265V range.
• New, intuitive and multilingual 3.5" control screen
• Fully upgradeable software and synergistic version via USB connection
• Saving of set parameters up to 200 different options, with the possibility to restore them
• Mobility function: user job settings and device settings can be loaded, saved, transferred via USB media
• A ventilation system is installed as needed to reduce dust emissions

Top quality welding:

• Digital ARC control with rapid ignition
• High ARC stability with reduced spatter
• 4-wheel wire feed mechanism with digital encoder that ensures perfect wire feed
• 3 MIG - MAG welding modes: dynamic, impulse and manual.

2 screen modules:

• Simple: simplified control techniques that meet the needs of many users and ensure optimal welding quality
• Professional: professional control arts that allows professionals to adjust all welding parameters

Cooking modes:

• 2 T: welding takes place when the torch trigger is pressed. And the welding is stopped when the trigger is released
• 4 T: welding takes place when the torch trigger is released and continues until the torch trigger is pressed again

Ergonomics:

• Reinforced equipment wheels, providing greater stability and maneuverability
• Compatible with gas cylinders up to 4 m3 (20 l)
• Protection class IP23S, which provides the ability to withstand harsh working conditions
• Tools section

Technical parameters:

• Supply voltage: 230 V / 1 fz / 50 - 60 Hz
• Electric current: 16 A
• Welding current: 15 - 220 A
• Welding wire: 0.6 - 1.2 mm
• Supported welding wire coils: Ø 200 / 300 mm
• Motorized wire feed mechanism
• Power of the wire feeding mechanism: 50 W
• Wire feed mechanism control: digital
• Wire feeding speed: 1 - 20 m/min
• Adaptation of wire feed rolls for wire: 1.0 - 1.2 mm
• Duty cycle current at 60% (EN60974-1): 150 A
• Duty cycle current at 100% (EN60974-1): 130 A
• Welding voltage: 67 V
• Dimensions: 750 x 450 x 800 mm
• Weight: 48 kg
• Protection class: IP23S
• Power cable cord length: 6.25 m

Complete set:

• Torch for aluminum, 3 m - Ø 1.0 - 1.2 mm
• Earthing terminal, 3.5 m
• Two types of aluminum rollers