MAGICMOTORSPORT has officially discontinued production of MAGPro2 x17 equipment due to the completion of the refurbished MAGICMOTORSPORT FLEX for use not only in specialized vehicle power-up workshops, but also in every universal car service. The FLEX device is a powerful and specialized tool that is easy to use thanks to the advanced MMS Helpdesk system.


     The MAGICMOTORSPORT FLEX device is used for easy tuning, reprogramming or modification of the car software. The FLEX internet interface reveals the full potential of this device. The connection takes place directly via the OBD connector or in Tricore mode. Advanced repairs require the use of a Flexbox module that allows programming in BDM, Bootloader, JTAG, and AUD modes. The device is capable of detecting possible connection or connection errors. Personalize your FLEX device to suit your needs by choosing the SW packages and accessories that best suit your workload.




     MAGICMOTORSPORT FLEX is suitable for the following transport:


For passenger cars

For motorcycles

For minibuses

For buses

For trucks

For tractors

For industrial transport

For ships

GET TO KNOW FLEX


     FLEX is an innovative mechatronics workshop tool that fully supports the latest developments in the automotive tuning and repair market. With this tool, you can increase your productivity and take your vehicle repair service to the next level with the new FLEX, which is universally used and suitable for every service.






     UPDATE YOUR WORKSHOP


Use your FLEX to easily reprogram, update, or modify most control unit software directly through the vehicle's OBD connector. An Internet connection gives you access to all the features that this tool offers you.


     YOU WILL HAVE A DECISION


The myth that chip tuning equipment is only suitable for those services that are specialized in increasing the power of vehicles. The MAGICMOTORSPORT Flex is suitable for all universal vehicle services! To perform upgrades and modifications, use the Flexbox module to program the control units in BDM, Bootloader, JTAG and AUD modes. The device detects connection and communication errors thanks to its modern advanced system.


     DISCOVER UNLIMITED POSSIBILITIES


MMS HELPDESK is a platform that provides technical support remotely. Wherever you are, remote assistance is available with professional and qualified professionals 24/7 chat and ticket assistance. Discover the limitless possibilities offered by FLEX with the MAGICMOTORSPORT knowledge base and services.


     LOG IN


Connect your vehicles to the most advanced MAGICMOTORSPORT technology with the various modes available to you. With FLEX, you can efficiently configure and modify all control units: engine, transmission, safety devices and others in the vehicle being repaired.




     ODB - Provides access to commonly used ODB standards, including:


ISO 15765: 2 x CAN

ISO 99141-2 & ISO 14230: 2 x K-LINE, 1xL-LINE

Ethernet

SAE J1850 PWM, VPW

SAE J1708

     BENCH - access to the OBD on the stand or even read and write the entire backup without opening the control unit:


Bosch Tricore engine control units

Transmission control units

     BOOT - Various mode support is available in this mode:


BDM MPC5xx

Bootloader C167

Bootloader ST10F2xx

Bootloader TC17xx

Bootloader Nexus MPC / SPC 5xxx

JTAG Renaissance SH705x

JTAG Renaissance SH72xxx

AUD NEC 76F00xx



BE UNIVERSAL, BE PROFESSIONAL


     The FLEX device is the solution for all your modification and programming needs, as it adapts to every situation thanks to the included accessories, allowing easy connection in any way. Start working with a professional programming tool that allows you to achieve the highest level of technology on the market.


TECHNICAL DATA:


LED indicators: operation / data transmission / errors

PC connection: USB 2.0

Power supply: 12V 5A / 24V 2.5 A

Communication connectors: ISO 15765: 2 x CAN; ISO 99141-2 & ISO 14230: 2 x K-LINE, 1xL-LINE; Ethernet; SAE J1850 PWM, VPW; SAE J1708

Protection measures: ESD 1kV, overvoltages, overloads, overheating, polarization, USB galvanic isolation

Universal 15 In / Out connectors

Voltages: internal 3.3V-5V, external 1.8 - 5.5V

JTAG, BDM, AUD, UART



     COMPLETE:


FLK35 - Cable set: FLX3.5

FLK42 - Adapter set: set of 6 contacts with adapter FLX4.

FLX1.1 - FLEX basic module

FLX1.9 - FlexBox module for FLEX

FLX2.10 - OBD connection cable: FLEX to CAN / Kline RED

FLX2.11 - OBD connection cable: FLEX to ENet GREEN

FLX3.9 - PC connection: USB 2.0 AM-BM BLK 1.8m

FLX4.9 - Ground connection 110-240V 14V 5A

FLX3.3 - Connection cable: FlexBox port C to NEC 7F00 XX

FLX3.4 - Connection cable FlexBox port D to BDM MPC5xx

FLX4.1 - FlexBox Port E 40 pins adapters for FLX3.5

FLX9.1 - Flex & FlexBox Diagnostic Adapter

FLX8.10 - FLEX in the device box