Шиномонтажные машина Butler Concert
- Mодель: BD06770
Цена в магазине с налогом
SUPER FAST Leverless tyre changers
Once a wheel is clamped on the plate, demounting and mounting (complete cycle) varies from 55” to 75” including run-flat and UHP. Since 35” is the total time required to lift, lock, unlock and unload the wheel, the total time required for a complete cycle is as low as 90”-110” from floor to floor position.
Speed set by the operator, exactly as required. Inverter with governor to protect the tyre.
3 WORKING MODES
Automatic (like Aikido)
When turned on, the tyre changer asks to choose the requested function:
demounting/mounting tyres (standard operation)
repeated demounting (as removing tyres from rims at car wreckers)
repeated mounting (as in car manufacturing plants)
The pre-set and dedicated cycle reduces working times
Place the upper roller on the rim edge. Rotate the wheel and place the valve in start position. Press start button and the tyre changer is ready to work in automatic mode (Aikido program).
Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again
PC MANAGED OPERATION
Fill in the tyre data
The software automatically selects the best program among: SOFT, STANDARD, RF/UHP
The user can decide to switch to another program (but the software does not allow programs which are not appropriate to that type of tyre)
Place upper and lower rollers at the rim edge and the valve at start position
Press start button and the tyre changer will carry out the programmed job with minimum assistance
At any time a job can be stopped and then continued with no need to start again the entire cycle.
PATENTED LEVER-FREE TOOL. EFFORTLESS.
Fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers. Made from scratch-proof material, it eliminates all risk of damage to the rim and allows operation close to the edge (zero-stress effect).
BEAD BREAKER DISCS
Built in scratch-proof material for complete rim protection. The rim edge sensor allows the roller to move forward automatically, enabling it to work on the bead without damaging the tyre’s sidewall.