Шиномонтажные машина Butler Capture
- Mодель: BD06760
Цена в магазине с налогом
LEVERLESS TYRE CHANGERS EQUIPPED WITH BUTLER EXCLUSIVE ACTIVE SENSOR SYSTEM
3 WORKING MODES
Automatic (like Aikido)
Confirm wheel dimensions by the keyboard. Rotate the wheel and place the valve in start position. Press start button and the tyre changer is ready to work in automatic mode (Aikido program).
Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again.
Simplifies the operator’s learning process. With buttons for operating the rollers and tools.
PC MANAGED OPERATION
After introducing wheel dimensions by the keyboard and pushing the safety pedal twice, the two rollers move near the rim edge ready to work on the tyre.
Press start button and the tyre changer will carry out the programmed job with minimum assistance.
At any time a job can be stopped and then continued with no need to start again the entire cycle.
When turned on, the tyre changer asks to choose the requested function:
demounting/mounting tyres (standard operation)
repeated demounting (as removing tyres from rims at car wreckers)
repeated mounting (as in car manufacturing plants)
The pre-set and dedicated cycle reduces working times
It is possible to memorize up to 100.000 different wheels by:
It is possible to transfer data among tyre changers. This is particularly useful when working with many tyre changers:
at the same location (large tyre shop, vehicle or tyre manufacturing plant)
at different locations (tyre shop chain, car dealer group)
Customized data and a quick training allow easy demounting of difficult tyres even by inexperienced workers.
Once a wheel is clamped on the plate, demounting and mounting (complete cycle) varies from 55” to 75” including run-flat and UHP. Since 35” is the total time required to lift, lock, unlock and unload the wheel, the total time required for a complete cycle is as low as 90”-110” from floor to floor position.
Speed set by the operator, exactly as required. Inverter with governor to protect the tyre.
EXTRA-GRIP CLAMPING DEVICE. THREE ADJUSTABLE WORKING HEIGHTS
Allows clamping with just one cone. Gripping pressure is automatically increased during rotation.
The tyre changer memorizes the height and calculates the working cycle consequently.
In case the plate is wrongly positioned for a certain tyre, a change of height is automatically requested.
PATENTED LEVER-FREE TOOL.
Fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers.
Made from scratch-proof material, it eliminates all risk of damage to the rim and allows operation close to the edge (zero-stress effect).
PNEUMATICALLY OPERATED BEAD BREAKER DISCS
Built in scratch-proof material for complete rim protection. The rim edge sensor allows the roller to move forward automatically, enabling it to work on the bead without damaging the tyre’s sidewall.
Once the valve is placed at start position at the beginning of the cycle, the software will keep the valve in safe position during the entire job.